Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Light Switch on the Volkswagen Golf

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008

See other generations:
Video tutorial

Here are the instructions to remove and replace the light switch or stalk switch on the Volkswagen Golf. First, get inside the vehicle and start removing the switch; simply pull it firmly towards you, disconnecting the electrical connector at the back to remove it completely, as shown in the video.

At this point, install the new stalk switch, as well as the original replacement; connect the electrical wiring of the new part and check the correct operation of all external lights!


Updated on 6 August 2026 by ScegliAuto


Related tutorials

How to replace the light switch on a Volkswagen Golf
How to replace the light switch on a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) This guide will show you the procedure for removing and replacing the light switch on a Volkswagen Golf. First, get into the vehicle on the driver's …
How to Replace the Hazard Light Switch on the Volkswagen Golf
How to Replace the Hazard Light Switch on the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today, we will go through the procedure for removing and replacing the hazard light switch on the Volkswagen Golf. First, get inside the cabin and st…
How to Remove the Light Switch from a Volkswagen Golf 5
How to Remove the Light Switch from a Volkswagen Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today, you will remove the light switch from a Volkswagen Golf 5. Get into the cabin, and as seen in the video, to the left of the steering wheel, sp…

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos