Do it yourself
Frequently asked questions about cars and motorcycles

How to Program the Key for the Volkswagen Polo?

Model: Volkswagen Polo 6R, Polo V, MK V, Polo 5, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Key

See other generations:
Video tutorial

You can program the key for the Volkswagen Polo by inserting the new key into the corresponding ignition slot: this will allow you to connect a diagnostic tool to the vehicle's OBD port located under the steering column. Once the connection is made, you can select the car model in question and the corresponding version: then you will need to perform the operations to ensure that the key is properly coded.

At the end of the procedure, you can disconnect the tool to finish.


Posted on 27 September 2026 by ScegliAuto


Related tutorials

Volkswagen Polo (2009-2017 / 6R, Polo V, MK V, Polo 5, MK 5) To program the key for a Volkswagen Polo, insert the key into the ignition switch and then connect the diagnostic tool to the vehicle's OBD port, whi…
Volkswagen Polo (2001-2009 / Polo IV, MK IV, Polo 4, MK 4, 9N) In order to program the key of the Volkswagen Polo, you will need to insert the blank key into the corresponding slot: this way, you will be able to …
Volkswagen Polo (2009-2017 / 6R, Polo V, MK V, Polo 5, MK 5) To program the key on the Volkswagen Polo, you will need to insert the blank key into the corresponding slot: once the ignition is turned on, you can…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos