Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Head Gasket on the Volkswagen Jetta 2.5L

Model: Volkswagen Jetta MK 5, A5 - Years 2005-2010
Part: Cylinder head

Video tutorial
Detailed instructions - In this guide, you will find instructions for removing and replacing the head gasket on the Volkswagen Jetta 2.5L. First, open the bonnet of the vehicle and begin to remove the cylinder head cover by unscrewing the upper bolts and disconnecting the coil wires; to remove the cylinder head, you will need to dismantle the timing kit, disconnecting the serpentine belt and removing the crankshaft pulley. At this point, unscrew the cylinder head bolts, performing the repair or replacement, following the video tutorial to the end!

Posted on 28 September 2026 by ScegliAuto


Related tutorials

Removing the Cylinder Head of the Volkswagen Jetta 2.0 TDI
Removing the Cylinder Head of the Volkswagen Jetta 2.0 TDI
Volkswagen Jetta (2005-2010 / MK 5, A5) This guide provides the main instructions for removing the cylinder head and replacing its gasket on the Volkswagen Jetta 2.0 TDI. First, open the bo…
How to Replace the Cabin Filter on a Volkswagen Jetta
Volkswagen Jetta (1998-2005 / A4, MK 4) To replace the cabin filter on a Volkswagen Jetta, open the bonnet to access the plastic cover at the base of the windscreen. After removing the seal…
Replacing the Oil Sump on a Volkswagen Jetta
Replacing the Oil Sump on a Volkswagen Jetta
Volkswagen Jetta (1998-2005 / A4, MK 4) In this short and simple guide, you will learn how to remove and replace the engine oil sump on a Volkswagen Jetta, as well as on the Golf and Bora. …

How to set the clock on the Vespa 125 Primavera?

To set the clock on the Vespa 125 Primavera, press and hold the black button located just below the black knob on the bike: keep the button pressed until the hour number starts to flash. Once it is flashing, you can change the hours with single presses of the same button; then, by pressing and holding the button again, the hour number will stop flashing and the minute number will start to flash, which can be modified in the same way, confirming the input by holding the button.

Watch the video!


by ScegliAuto

More videos