Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Head Gasket on the Volkswagen Passat 2.0 TDI

Model: Volkswagen Passat MK 8, 3G, B8 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Cylinder head

See other generations:
Video tutorial

In this brief guide, we will see the main instructions that will allow us to install the head gasket on the Volkswagen Passat 2.0 TDI. First, ensure that the cylinder head is in excellent condition and perfectly clean before remounting the new gasket; then install the cylinder head, tightening all the screws with a torque wrench to the correct torque value, as shown in the video.

At this point, it will be possible to reinstall all the valves and the camshaft, then remount the cylinder head cover, following the video tutorial to the end!


Posted on 10 February 2026 by ScegliAuto


Related tutorials

How to Replace the Glow Plugs on the Volkswagen Passat TDI
How to Replace the Glow Plugs on the Volkswagen Passat TDI
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) In this guide, discover the steps to remove and replace the glow plugs in the engine of the Volkswagen Passat with a TDI engine. First, open the bonn…
Cylinder Head Gasket Replacement
Cylinder Head Gasket Replacement
Volkswagen Passat (2005-2010 / B6, 3C) After machining the cylinder head, use a straight bar and a valve feeler gauge to check the flatness of the surface, both on the head side and the cy…
Replacement of the thermostat for the Volkswagen Passat 2.0 TDI
Replacement of the thermostat for the Volkswagen Passat 2.0 TDI
Volkswagen Passat (2010-2014 / B7) Today we will see the instructions that will allow us to disassemble and replace the thermostat of the Volkswagen Passat 2.0 TDI. First, we open the …

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos