Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the Rocker Cover Gasket

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Valve

See other generations:
Video tutorial

Replacing the rocker cover gasket is an extremely simple operation that does not require special skills. Once the fixing bolts of the rocker cover are unscrewed, remove it from its seat and pull out the old gasket; then clean the gasket seat thoroughly, both under the cover and on the head, and apply the new gasket in the designated groove along the edges of the cover.

Before repositioning the cover, apply gasket sealant at the engine supports and then position the cover and tighten the fixing bolts.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (2005-2010 / B6, 3C) After machining the cylinder head, use a straight bar and a valve feeler gauge to check the flatness of the surface, both on the head side and the cy…
Volkswagen Passat (2005-2010 / B6, 3C) The support pistons for the rear boot lid are actually gas struts. Over time, the internal seals may deteriorate, causing gas to escape and consequen…
Volkswagen Passat (2005-2010 / B6, 3C) Before installing the exhaust gas manifold, thoroughly clean the surfaces of both the cylinder head and the manifold to remove any dirt and deposits;…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos