Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gas Struts on the VW Passat B6 Boot

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Body

See other generations:
Video tutorial

The support pistons for the rear boot lid are actually gas struts. Over time, the internal seals may deteriorate, causing gas to escape and consequently losing the strut's ability to support the weight of the boot lid, which will tend to fall rather than stay in position, also preventing it from being held during the closing manoeuvre and making it difficult to open.

Replacing these struts is very simple, but it is advisable to check right away that the new struts have the same type of attachment and length. Once the boot is open, extract the anchoring tab from the ball joint and remove the old strut, then insert the new one, securing it with the relevant clips.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Replace the Gas Struts on Volkswagen Passat B5
How to Replace the Gas Struts on Volkswagen Passat B5
Volkswagen Passat (1996-2005 / 3BG, B5) In this video, see how to replace the gas struts on a Volkswagen Passat B5: open the tailgate and position a hydraulic jack (or another support) unde…
Replacement of Front Bonnet Gas Strut
Replacement of Front Bonnet Gas Strut
Volkswagen Passat (1996-2005 / 3BG, B5) If the front bonnet struggles to stay open, it means the gas strut (often referred to as a hydraulic piston) is damaged and can no longer support the…
Instructions for Replacing the EGR Valve Cooler
Instructions for Replacing the EGR Valve Cooler
Volkswagen Passat (2005-2010 / B6, 3C) The EGR circuit collects some exhaust gases at the outlet and re-injects them into the engine's air intake: the main advantage is that NOx is reduced…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos