Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Gas Struts on Volkswagen Passat B5

Model: Volkswagen Passat 3BG, B5 - Years 1996-2005
Part: Checks and maintenance

In this video, see how to replace the gas struts on a Volkswagen Passat B5: open the tailgate and position a hydraulic jack (or another support) under the tailgate to prevent it from falling during replacement. Insert a flat screwdriver under the retaining ring that secures the strut to the tailgate, and gently release the ring to disconnect the strut. Repeat the operation on the other side. Move on to installing the new struts by first connecting the body side, snapping the retaining ring into the hinge seat; then connect the tailgate side, fitting the strut and securing it with the retaining ring. Now carefully remove the jack, and test the tailgate by opening and closing it several times.

Posted on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Passat (2005-2010 / B6, 3C) The support pistons for the rear boot lid are actually gas struts. Over time, the internal seals may deteriorate, causing gas to escape and consequen…
Volkswagen Passat (2005-2010 / B6, 3C) In this tutorial, you will learn how to replace the remote battery in the Volkswagen Passat, a very simple and quick operation. You will need a repla…
Volkswagen Passat (2005-2010 / B6, 3C) Disassembling and repairing the door handle of a Volkswagen Passat B6 is not complicated, but it requires a bit of patience. First, open the door and…

Other guides you may be interested in

    Frequently Asked Questions

    • Passat 2005-2010 - How to unlock the Volkswagen Passat's lock? Read answer
    • Passat 2005-2010 - Why doesn't the Volkswagen Passat start up? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos