Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear seats of the Volkswagen Passat

Model: Volkswagen Passat B6, 3C - Years 2005-2010
Part: Seat

In this guide, we will see the instructions that will allow us to disassemble and replace the rear seats of the Volkswagen Passat. First, we open the rear doors of the car and start pulling the rear seat upwards, in order to detach and remove it; then we unscrew the screws that we find on the base of the backrests if we want to remove them as well (in this case we will significantly increase the cargo volume of the trunk), as shown in the video. At this point, we carry out the repair or replacement of the rear seats, applying the reverse procedure for reassembly!

Posted on 21 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Seats on a Volkswagen Passat SW B5
Removing the Rear Seats on a Volkswagen Passat SW B5
Volkswagen Passat (1996-2005 / 3BG, B5) In today's tutorial video, learn how to remove the rear seats on the Volkswagen Passat B5, in station wagon version, by following these simple steps.…
Removing the Rear Seats from a Volkswagen Passat
Removing the Rear Seats from a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) In this brief and simple guide, you will find instructions on how to remove the rear seats and bench of a Volkswagen Passat, following the steps outl…
Removing the Rear Seats from a Passat
Removing the Rear Seats from a Passat
Volkswagen Passat (2005-2010 / B6, 3C) Want to replace the rear seats in your car? Here’s how to remove the rear seat base from a Passat. Reach under the rear seat base and lift it off the…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos