Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What Is the Fuse Diagram for the Volkswagen Fox?

Model: Volkswagen Fox - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Fuse box

See other generations:
Video tutorial

In this video, you can see where the fuse boxes for the Volkswagen Fox are located and their respective diagrams, useful if you need to check the fuses of a malfunctioning device. The first box is located in the engine compartment, protected by the black plastic cover on the positive terminal of the battery.

The second box is located inside the cabin, behind the door in the lower left area of the dashboard, on the driver's side. In case of blown fuses, ensure you use replacements with the same amperage and work with the vehicle turned off.


Posted on 10 November 2026 by ScegliAuto


Related tutorials

Fuse box layout and positioning of the Volkswagen Fox
Fuse box layout and positioning of the Volkswagen Fox
Volkswagen Fox (2003-2011 / MK 1) This brief guide will show us the layout and positioning of the fuse boxes of the Volkswagen Fox. First of all, in the first section of the video we …
Fuse Diagram for Volkswagen Fox
Volkswagen Fox (2003-2011 / MK 1) In today's guide video, we will look at the fuse diagram found on the Volkswagen Fox; this diagram covers the fuses for the battery and relays. The s…
Internal Fuse Layout and Positioning for the Volkswagen Fox
Internal Fuse Layout and Positioning for the Volkswagen Fox
Volkswagen Fox (2003-2011 / MK 1) Below are the instructions that will allow you to access the internal fuse box, along with the layout and diagram for the Volkswagen Fox. First, open…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos