Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Seats on Volkswagen Golf 7

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Seat

In this tutorial, you will learn how to remove the rear seats of a seventh-generation Volkswagen Golf. First, remove the boot compartment and then undo the main bolt of the spare wheel to remove it. At this point, take off the boot lid flap and start by lifting the rear bench upwards to unclip and extract it. Now undo the screws found underneath to also remove the backrests: of course, you must also undo the screws located at the back, accessing them from the boot!

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seats from a Volkswagen Golf - Jetta
How to Remove the Rear Seats from a Volkswagen Golf - Jetta
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Today, we will see in this video tutorial the steps to remove the rear seats from a Volkswagen Golf, as well as from a Jetta. First, open the rear ha…
How to Replace the Rear Seats on the Volkswagen Golf?
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) To replace the rear seats on the Volkswagen Golf, open the tailgate to access the boot: here you will find the screws that secure the rear seat backs…
How to Remove the Rear Seats from a Volkswagen Golf - Jetta
How to Remove the Rear Seats from a Volkswagen Golf - Jetta
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In this brief guide, you will find instructions to remove the rear seats from a Volkswagen Golf, as well as from a Jetta, following the steps outline…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos