Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from a Volkswagen Up!

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Car stereo

In today's video, you will see the main instructions on how to remove the original radio from a Volkswagen Up. First, enter the vehicle: then remove the air flow control knob and use a plastic lever to remove the trim around the climate control buttons. At this point, unscrew the screws located underneath and, using the appropriate tools, extract the radio by inserting them into the holes; once done, disconnect any electrical connectors at the back and fit the new radio, as shown in the video.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from a Volkswagen Up
How to Remove the Radio from a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Before starting, sit in the driver’s seat of your Volkswagen Up. Begin by prying and removing the radio frame using a thin but sturdy tool. Then, uns…
Removing the Standard Radio from the Volkswagen Up
Removing the Standard Radio from the Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) These brief and simple steps will show you how to remove and replace the standard radio in the Volkswagen Up. First, get in the vehicle and start by …
Removing the Original Radio from a Volkswagen Up!
Removing the Original Radio from a Volkswagen Up!
Volkswagen Up (2011-2024 / MK 1) In this video, you will see the main instructions for removing and replacing the original radio from a Volkswagen Up. First, get inside the vehicle a…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos