Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Speedometer Cable on the Volkswagen T25/T3

Model: Volkswagen Transporter T25, T3, MK 3 - Years 1979-1990

In this video, you will see how to remove and replace the speedometer cable on the Volkswagen Transporter T25/T3, following the instructions below. First, get inside the vehicle and start by removing the instrument cluster; then take off the upper cover and disconnect the speedometer cable found at the back, as shown in the video. At this point, use a socket spanner to remove the lower metal panel and disconnect the cable; remove the wheel and insert the new speedometer drive, threading the new cable through the guides.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Transporter (1979-1990 / T25, T3, MK 3) The speed cable is connected to the drive located at the output of the gearbox by a flexible cable that runs through the engine bay and the bulkhead.…
Volkswagen Transporter (2003-2014 / T5, MK 5) In this video we see our youtuber dealing with the sliding electric door of a Volkswagen Transporter T5 that didn't want to close. After various atte…
Volkswagen Transporter (2003-2014 / T5, MK 5) This video explains how to reset the service light on your Volkswagen Transporter T5. To perform this procedure, the engine must be off. So, turn off…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos