Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Panoramic Roof Blind on the Volkswagen Tiguan?

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

To remove the panoramic blind from the Volkswagen Tiguan, you need to remove the plastic covers accessible by opening the boot lid; these are all secured with clips that must be released. Next, fully open the sunroof using the relevant control and remove all the Torx screws of size 25 located on the sides of the roof.

Then, close the glass and remove it to loosen the Torx screws of size 20 that secure the blind. You will also need to loosen screws accessible from the boot: once the blind is removed, you can replace it along with the sunroof and re-secure all the parts.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

Replacing the Sunshade of the Panoramic Roof in the Volkswagen Tiguan
Replacing the Sunshade of the Panoramic Roof in the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) By following these simple steps, you will see how to disassemble and replace the sunshade of the panoramic roof in the Volkswagen Tiguan. First, get …
What to Do If the Sunshade of the Volkswagen Tiguan Panoramic Roof Stays Halfway
What to Do If the Sunshade of the Volkswagen Tiguan Panoramic Roof Stays Halfway
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Learn how to resolve this issue that has kept the sunshade of a YouTuber's Volkswagen Tiguan stuck halfway for months: turn on the ignition and simul…
How to Repair the Sunshade on the Volkswagen Tiguan's Panoramic Roof
How to Repair the Sunshade on the Volkswagen Tiguan's Panoramic Roof
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) In this video, you will see the sunshade of a Volkswagen Tiguan that does not retract properly into its housing. To repair it, remove the end part of…

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos