Do it yourself
Frequently asked questions about cars and motorcycles

How to repair the curtain on the sunroof of the Volkswagen Tiguan

Model: Volkswagen Tiguan BW, MK 2, AD - Years 2016-2025
Part: Oxygen sensor

In this video we see the curtain of a Volkswagen Tiguan that does not fit well in its seat; to repair it we need to remove the final part of the roof from the inside, which is only pressure: we then open the glass roof and remove the screw and washers that fix the roof opening at the bottom, then we remove the two screws on each side that are on the metal guides. We close the glass. In the rear part of the roof, which we will have opened in this way, we can see the condition of the curtain. We remove the two screws in the rear part, and if necessary we also remove those from the inside, so that we can remove the entire curtain. We can find the new curtain on it. Grandado. Com with the code 1k9-877-307-b at the price of 124.89 euros, free delivery. We insert the curtain into the blade, put it back in the roller making sure it is well attached; we can reassemble it by inserting it between the imperial and the roof. Then we will fix it again with the bolts that we had previously removed.

Posted on 22 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Tiguan (2007-2016 / 5N, MK 1) To remove the panoramic blind from the Volkswagen Tiguan, you need to remove the plastic covers accessible by opening the boot lid; these are all sec…
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Following these simple steps, we will see how to disassemble and replace the sunshade of the panoramic roof of the Volkswagen Tiguan. First of all, w…
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) This brief guide provides instructions on how to remove and replace the sunroof seal on a Volkswagen Tiguan. First, get inside the vehicle and turn o…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos