Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Air Vents on the Volkswagen Passat B6

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Air vents

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the dashboard air vents on the Volkswagen Passat B6 and B7, following the instructions below. First, get inside the vehicle and start by removing the air vents located on the sides; to do this, lever them out from the sides or inside, as shown in the video.

Next, perform the same operation for the central vents, carefully prising them out from the sides (taking care not to damage the dashboard); then, simply refit the new vents by applying the reverse procedure!


Updated on 23 April 2026 by ScegliAuto


Related tutorials

Removing the Rear Air Vents on a Volkswagen Passat
Removing the Rear Air Vents on a Volkswagen Passat
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) Today, we will show you how to remove and replace the rear air vents on a Volkswagen Passat. First, access the rear of the cabin and start by removin…
How to Replace the Air Vents on the Volkswagen Passat
How to Replace the Air Vents on the Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) To replace the air vents on the Volkswagen Passat, use a thin object as a lever. Insert it into the bottom of the vents to extract them from their ho…
How to Reset the Climatronic in a Volkswagen Passat?
How to Reset the Climatronic in a Volkswagen Passat?
Volkswagen Passat (2005-2010 / B6, 3C) In this tutorial, see how to reset the Climatronic system in a Volkswagen Passat, a very simple and quick operation, for example, as a troubleshootin…

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos