Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard from the Volkswagen Passat

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Dashboard

See other generations:
Video tutorial

Today's main instructions will guide you on how to remove the entire dashboard from the Volkswagen Passat. First, get inside the vehicle and start removing all dashboard elements; remove the steering wheel and its airbag, then disassemble the instrument panel and the glove compartment.

At this point, remove the radio and the climate control panel, unscrewing all the securing screws and disconnecting the various electrical connectors; then remove the dashboard, making the necessary repairs, following the video tutorial to the end!


Posted on 5 April 2026 by ScegliAuto


Related tutorials

How to Remove the Wiper Motor on Volkswagen Passat B5
How to Remove the Wiper Motor on Volkswagen Passat B5
Volkswagen Passat (1996-2005 / 3BG, B5) In this video tutorial, you will see how to remove the front wiper motor on a Volkswagen Passat B5. First, open the bonnet of your car and remove the…
How to remove the front door panel on a Volkswagen Passat?
How to remove the front door panel on a Volkswagen Passat?
Volkswagen Passat (2005-2010 / B6, 3C) In this tutorial, you will see how to remove the front door panel on a Volkswagen Passat, a very simple and quick operation. First, open the door in …
How to disassemble the door handle of the Volkswagen Passat B8 2017
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) If one of the handles of your Volkswagen Passat B8 (2017) is broken or shows serious signs of wear and you want to replace it with a new one, then al…

Other guides you may be interested in

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos