Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wheel Arch on a Volkswagen Passat?

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Wheel

See other generations:
Video tutorial

To replace the wheel arch on a Volkswagen Passat B6, you need to lift the car with a jack and remove the bolts securing the wheel corresponding to the wheel arch being replaced. Once the wheel is removed, you will have access to the bolts that secure the wheel arch to the rest of the bodywork.

These need to be loosened so that the wheel arch can be pulled out of its housing. Consequently, the new wheel arch can be positioned inside its housing and secured with the previously removed bolts.

At this point, you can reinstall the wheel.


Updated on 24 April 2026 by ScegliAuto


Related tutorials

How to Replace the Windscreen Washer Pump on a Volkswagen Passat?
How to Replace the Windscreen Washer Pump on a Volkswagen Passat?
Volkswagen Passat (2005-2010 / B6, 3C) To replace the windscreeen washer pump on a Volkswagen Passat, loosen the screws securing the front right wheel to access the inner lining of the whe…
How to Replace the Serpentine Belt on a Volkswagen Passat
How to Replace the Serpentine Belt on a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Before you begin, lift the front of your Volkswagen Passat and then remove the front right wheel. Start by unscrewing and removing the screws that se…
Removing the Front Wing on Volkswagen Passat B6
Removing the Front Wing on Volkswagen Passat B6
Volkswagen Passat (2005-2010 / B6, 3C) In today's video, you will see the main instructions for removing the wheel arch and front wing of a Volkswagen Passat B6. First, remove all the scre…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos