Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Car Radio in a Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Car stereo

See other generations:
Video tutorial

Today, work on the Volkswagen Polo by replacing the original car radio. Use a screwdriver in the two slots on the fascia and lever it off. Remove the 4 fixing screws.

Now, pull the car radio towards you and disconnect the power and antenna connectors. Insert the new car radio into its slot.

Refit the screws. Insert the metal fascia and then connect the new connectors.

Now attach everything to the car radio and insert it into the slot. Operation completed.

Enjoy your new car radio!


Updated on 8 May 2026 by ScegliAuto


Related tutorials

I Have the Radio Code for My Volkswagen Polo, How Do I Reactivate It?
I Have the Radio Code for My Volkswagen Polo, How Do I Reactivate It?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) To reactivate the radio in your Volkswagen Polo independently, with the radio unlock code (which is provided at the time of vehicle purchase along wi…
Replacing the Radio in a Volkswagen Polo
Replacing the Radio in a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Remove the radio from the Volkswagen Polo if it is damaged or if you want to change it. Use a plastic lever to remove the radio trim (without damagin…
How to Unlock the Radio on a Volkswagen Polo?
How to Unlock the Radio on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Hello, today you will unlock the radio on your Volkswagen Polo. Start by turning on the radio by pressing the power button. Then, a request for a cod…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos