Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling and Replacing the Antenna of the Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Antenna

See other generations:
Video tutorial

Today we will see the procedure for dismantling and replacing the radio antenna of the Volkswagen Polo in simple steps. First, open the rear hatch of the boot and gently detach the headlining to access the interior of the roof.

Disconnect the electrical connector of the antenna and unscrew the nut to remove it from the outside along with its base, as shown in the video. At this point, install the new antenna, securing it properly and making the connection, then reassemble the interior trim of the roof and close the hatch!


Updated on 18 October 2026 by ScegliAuto


Related tutorials

Antenna Replacement on VW Polo
Antenna Replacement on VW Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Replace the antenna on a Volkswagen Polo. Open the boot lid, and use a screwdriver to lever between the headlining panel and the cover (without damag…
Replacing the Antenna on a Polo
Replacing the Antenna on a Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Let’s look at replacing the antenna and its mounting base on a Volkswagen Polo. Open the tailgate of the car, use a lever between the trim plastic an…
Replacement of the Volkswagen Polo antenna
Replacement of the Volkswagen Polo antenna
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this short guide, we will see the main instructions on how to disassemble and replace the antenna of the Volkswagen Polo car radio. First of all, …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos