Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Antenna Replacement on VW Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Antenna

See other generations:
Video tutorial

Replace the antenna on a Volkswagen Polo. Open the boot lid, and use a screwdriver to lever between the headlining panel and the cover (without damaging the headlining). Pull the plastic out from the panel and disconnect the power connector.

Unscrew the securing bolt of the antenna support (located between the body and the support). Fit the new support onto the roof of the car (screw the bolt with the screwdriver until fully tightened).

Test the correct operation of the antenna. Close the inspection compartment with the plastic cover.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

Replacement of the Volkswagen Polo antenna
Replacement of the Volkswagen Polo antenna
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this short guide, we will see the main instructions on how to disassemble and replace the antenna of the Volkswagen Polo car radio. First of all, …
How to Replace the Antenna on a Volkswagen Polo 1.2 L Highline
How to Replace the Antenna on a Volkswagen Polo 1.2 L Highline
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this video tutorial, you will see how to replace the antenna on a Volkswagen Polo 1.2 L Highline by following a few simple steps: use a cleaning s…
Dismantling and Replacing the Antenna of the Volkswagen Polo
Dismantling and Replacing the Antenna of the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Today we will see the procedure for dismantling and replacing the radio antenna of the Volkswagen Polo in simple steps. First, open the rear hatch of…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos