Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Antenna on a Volkswagen Polo 1.2 L Highline

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017
Part: Antenna

In this video tutorial, you will see how to replace the antenna on a Volkswagen Polo 1.2 L Highline by following a few simple steps: use a cleaning spray to clean the surface where you will apply the new antenna and dry the surface. Unscrew the old antenna, then take the antenna connector and screw it in place as shown in the video. Turn on the radio to check the proper functioning of the radio channels. If it works correctly, hide the antenna wire inside the shark fin; remove the adhesive film and attach the new shark fin antenna to the vehicle's surface.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the Volkswagen Polo antenna
Replacement of the Volkswagen Polo antenna
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) In this short guide, we will see the main instructions on how to disassemble and replace the antenna of the Volkswagen Polo car radio. First of all, …
How to Replace the Antenna on a Volkswagen Polo?
How to Replace the Antenna on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) To replace the antenna on a Volkswagen Polo, open the tailgate to leverage an object and detach the headlining at the rear of the vehicle. Once the h…
How to Replace the Antenna on a Volkswagen Polo?
How to Replace the Antenna on a Volkswagen Polo?
Volkswagen Polo (1994-2003 / MK III, Polo III, Polo 3, MK 3, 6N) To replace the antenna on a Volkswagen Polo, open the rear hatch of the car to detach the headlining at the back. Once the panel under the roof is re…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos