Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Antenna on a Polo

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Antenna

See other generations:
Video tutorial

Let’s look at replacing the antenna and its mounting base on a Volkswagen Polo. Open the tailgate of the car, use a lever between the trim plastic and the roof panel (without breaking the trim), and pull the plastic cover out from above the panel. Move the cover panel and unscrew the securing screws under the antenna support (located between the metal and the support).

Fit the new support onto the roof of the car (screw the bolt in with a screwdriver until fully tightened). Test the antenna’s functionality once the installation is complete.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

How to Change the Antenna on the Volkswagen Polo
How to Change the Antenna on the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) If you want to personalise your vehicle by replacing the standard antenna with a shark fin model, proceed as follows: you can purchase an aftermarket…
Dismantling and Replacing the Antenna of the Volkswagen Polo
Dismantling and Replacing the Antenna of the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Today we will see the procedure for dismantling and replacing the radio antenna of the Volkswagen Polo in simple steps. First, open the rear hatch of…
Replacement of the Volkswagen Polo antenna
Replacement of the Volkswagen Polo antenna
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this short guide, we will see the main instructions on how to disassemble and replace the antenna of the Volkswagen Polo car radio. First of all, …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos