Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Antenna on the Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Antenna

See other generations:
Video tutorial

If you want to personalise your vehicle by replacing the standard antenna with a shark fin model, proceed as follows: you can purchase an aftermarket shark fin antenna, then remove the existing antenna on the vehicle, disconnect its electrical connector, and position the new one after detaching the base of the old antenna.

Tighten the nut securing the base of the new antenna and reconnect the electrical connector.

At this point, the job will be complete.


Updated on 1 July 2026 by ScegliAuto


Related tutorials

Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this video tutorial, you will see how to replace the antenna on a Volkswagen Polo 1.2 L Highline by following a few simple steps: use a cleaning s…
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this short guide, we will see the main instructions on how to disassemble and replace the antenna of the Volkswagen Polo car radio. First of all, …
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) If the radio antenna on your Volkswagen Polo Mk5 (2009-2017) is damaged or excessively worn and you want to replace it, simply read the following gui…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos