Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light of the Volkswagen Up

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Service warning light

If you notice the maintenance light appearing when you start your Volkswagen Up, you will need to perform a manual reset to resolve the issue. With this guide, you will be able to do it quickly and easily. First, ensure that the car is completely off and that all doors are properly closed. Then locate and hold down the small button situated between the speedometer and the fuel gauge. At the same time, insert the key and turn on the ignition. Wait a few seconds, and as soon as a new value appears on the mini display, release the button to complete the reset.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "insp" Service Light on the Volkswagen Up
How to Reset the "insp" Service Light on the Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) This guide shows how to reset the "insp" service light for the regular maintenance oil change on the Volkswagen Up. First, get inside the vehicle and…
How to Reset the Service Light on a Volkswagen Up?
How to Reset the Service Light on a Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) To reset the service light on a Volkswagen Up, go inside the cabin and press the button on the right side of the instrument panel marked "0.0/SET". W…
How to Reset the Service Light on a Volkswagen Up
How to Reset the Service Light on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) To manually reset the service light on your Volkswagen Up, follow these simple steps. First, enter the cabin (driver's side) and ensure all doors are…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos