Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the 2020 Volkswagen Up

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Service warning light

To reset the service light on your 2020 Volkswagen Up independently and free of charge, simply follow the instructions in this mini guide. First, enter the cabin and locate the "0.0/Set" button situated at the bottom of the dashboard, between the speedometer and the fuel gauge. Press and hold it while turning on the ignition. When prompted to continue with the reset, release the button and select "OK". Finally, turn off the ignition.

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Volkswagen Up?
How to Reset the "Service" Light on a Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) Hello, today focus on resetting the "Service" light on your Volkswagen Up. Before starting, ensure that you have completed the service as required by…
How to Reset the Service Light on a Volkswagen Up?
How to Reset the Service Light on a Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) To reset the Service light on a Volkswagen Up, press and hold the button on the right side of the instrument cluster, labelled "0.0/SET". While holdi…
How to Reset the Service Light on a Volkswagen Up
How to Reset the Service Light on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) To manually reset the service light on your Volkswagen Up, follow these simple steps. First, enter the cabin (driver's side) and ensure all doors are…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos