Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wiper Motor of the Volkswagen Golf

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003

See other generations:
Video tutorial

Today, we will see in this video tutorial how to dismantle and replace the front wiper motor of the Volkswagen Golf in simple and quick steps. First, open the engine bonnet of your car and start by removing the wiper arms, also taking off the blades; then remove the plastic cover found underneath, as shown in the video.

At this point, unscrew the screws of the wiper mechanism, removing it along with the motor; disconnect the electrical connector and replace the wiper motor with the new one!


Updated on 19 May 2026 by ScegliAuto


Related tutorials

Removing Windscreen Washer Pump from Volkswagen Golf 5
Removing Windscreen Washer Pump from Volkswagen Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) How to remove the windscreen washer pump? Let's see how to disassemble the pump from inside the front bumper. Remove the right front wheel, start by …
Removing the Wiper Arm on a Golf 4
Removing the Wiper Arm on a Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Removing the wiper blade from a Volkswagen Golf 4? Here’s how to do it. Open the front bonnet and lift it, remove the screw covers (use a screwdriver…
Fuse Box Diagram for the Volkswagen Golf
Fuse Box Diagram for the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) All the fuses in this vehicle are located within two boxes, both on the driver's side. The first is in the cabin, just below the steering column on t…

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos