Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Bulb in No Time

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Tail light bulb

Burnt bulb? Replacing it is simple; discover how to do it in just a few moments.
Open the boot lid, and inside, you will see a small cover on either side; simply pull it towards you to remove it.
At this point, you can see the connector supplying power to the bulb; disconnect it as clearly shown in the video, and rotate the bulb holder counterclockwise until you feel a click.
Pull it down gently and press the new bulb into its holder, slightly turning the bulb counterclockwise to remove it.
Once the new bulb is inserted, refit the bulb holder into its housing, this time turning it clockwise, close the cover, and you're done.

Updated on 1 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) To quickly and safely replace the front headlight bulb on your Volkswagen Golf Mk4, carefully read all the steps described in this guide and apply th…
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Before starting, we need to open the rear hatch of our Volkswagen Golf. Let's start by unscrewing and removing the screws that secure the rear tailli…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) If you want to replace the headlight bulb on your 2015 Volkswagen Golf Mk7 yourself, follow this procedure to complete the operation quickly and safe…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos