Do it yourself
| ||||
|
Volkswagen Golf - Video tutorial
Model: Volkswagen Golf
Golf 7, Golf VII, MK 7
- Years 2012-2019 The reset of the Volkswagen Golf 7 Service warning light is carried out by holding down the 0.0 button located in the center of the instrument panel, while this will be off. By continuing to hold it down, you will need to turn the key inside the panel, so that the instrument panel can be turned on: when you release the key, a message will appear asking if you really want to reset the maintenance and oil warning light. By pressing the OK button located on the lever to the right of the steering wheel or on its right spoke, it will be possible to completely reset the warning light that will disappear from the instrument panel.
Posted on 13 May 2024 by ScegliAuto
How to reset the service light on the VW Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The service light comes on in a Volkswagen Golf model 4 when it is necessary to have the car serviced. The service consists of topping up fluids and
How to reset the service light on a Volkswagen Golf.
Volkswagen Golf (2019-2024 / Golf 8, MK 8, Golf Viii) Below are the instructions necessary to reset the service light for the regular maintenance of the Volkswagen Golf engine oil change. First, get into
How to reset the service light and the inspection light in a Volkswagen Golf 7
Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) This short video shows us how to reset the service light and the inspection light in a Volkswagen Golf 7 after performing the usual service. Resettin Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.068
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |