Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Climate Control Switch Bulbs on a Volkswagen Golf 4

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Instrument panel light

In this video, you will learn how to remove and replace the bulbs of the climate control switches on the fourth series Volkswagen Golf, as well as on the Bora and Jetta. First, get inside the vehicle and start by removing the climate control knobs; use pliers for this, as shown in the video. At this point, extract the small bulb contained within the lamp holder; replace it with a new one, inserting it correctly. Finally, refit everything, performing the same operation for the other dashboard lights!

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Climate Control Bulbs on the Volkswagen Golf 4
Replacing the Climate Control Bulbs on the Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In today's video, you will see the main instructions on how to remove and replace the bulbs for the climate control on the fourth series Volkswagen G…
How to Replace the Dashboard Lights in the Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Replacing the bulbs inside the air conditioning knobs? This is not too complicated. Remove the knobs using pliers without damaging them. Extract the …
How to Dismantle the Climate Control Controls in a Volkswagen Golf
How to Dismantle the Climate Control Controls in a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Start by removing the glove box and the radio, which are clipped in, then disconnect the connector. Next, use a flathead screwdriver to remove the co…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos