Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to replace the exterior rear view mirror light on Volkswagen Polo 6R

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo MK V, MK 5, Polo V, Polo 5, 6R - Years 2009-2017
Part: Outside rearview mirror
Operation: How to replace the exterior rear view mirror light on Volkswagen Polo 6R

In this new mini guide of ours dedicated to your Volkswagen Polo 6r, we will find out how to correctly and safely replace the indicator light located in the lower area of the external rear-view mirror. First, park the car on a level surface and activate the handbrake. Then go outside the car and stand in front of the mirror affected by the replacement of the spotlight. Use a flat screwdriver to remove the external cover and proceed by unscrewing all the various screws present. Finally, disconnect the spotlight from the electrical pin and replace it with the new one.


Posted on 2 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - How do you replace the external mirror of the Volkswagen Polo with the arrow indicator? Read Answer
    • Polo 2001-2009 - How do you replace the wing mirror on Volkswagen Polo 9n3? Read Answer
    • Polo 2009-2017 - How much does it cost to replace the rearview mirror on the Polo? Read Answer
    • Polo 2009-2017 - How do you close the mirrors in the Volkswagen Polo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos