Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Volkswagen Ameo?

Model: Volkswagen Ameo MK 1 - Years: 2016, 2017, 2018, 2019, 2020
Part: Service warning light

Video tutorial

Resetting the service light on a Volkswagen Ameo is a simple and quick operation. First, ensure you have completed all scheduled maintenance tasks.

Start by inserting the key but leave it in the initial position. Then, press and hold the "0.0/SET" button located in the center of the dashboard while simultaneously turning on the ignition.

Keep the button pressed until the various warning lights on the dashboard turn off. Complete the procedure by pressing the left button.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

Volkswagen Ameo (2016-2020 / MK 1) As shown in this tutorial, resetting the service light in the Volkswagen Ameo is a very simple and quick task. Before proceeding, you must complete a…
Volkswagen Ameo (2016-2020 / MK 1) To replace the battery in a Volkswagen Ameo, open the hood to access the components inside the engine compartment. On the right side, you will find t…
Volkswagen Ameo (2016-2020 / MK 1) Here are the main instructions on how to remove and replace the front door panel of the Volkswagen Ameo. First, open the front door and start removin…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

What does the "Code 82" message indicate in the Chevrolet Orlando and how to remove it?

If the "Code 82" message appears on the dashboard of your Chevrolet Orlando, it means that the service interval in miles or time has been reached. Once all scheduled maintenance tasks are completed, you can remove the warning by following the simple procedure shown in this tutorial. First, insert the key and turn on the ignition, then press the "MENU" button located on the left control stalk and navigate to the screen displaying the "Reset" option. At this point, press the "SET/CLR" button at the end of the same stalk and confirm the reset.

Watch the video!


by ScegliAuto

More videos