Do it yourself
Frequently asked questions about cars and motorcycles

Lock Switch Functionality Check

Model: Volkswagen Vento A3, MK 1 - Years 1991-1998
Part: Checks and maintenance

If the interior lights remain on when you lock the vehicle with the remote key (or directly with the mechanical key), it is likely that a lock is not functioning correctly. Inside the lock, there is a micro switch that signals the comfort module about the lock's status. The failure of this micro switch is a common fault in these vehicles but fortunately easy to repair; it is not necessary to replace the entire lock, just disassemble it and replace the micro switch inside, which can be found at any electronics store.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Vento (2010-2022 / Polosedan, A05) Today, you will see the instructions that will allow you to disable the alarm system on the Volkswagen Vento. First, get into the vehicle on the driv…
Volkswagen Vento (2018-2024 / MK 4, A7) In this type of car, the fuse box is located under the dashboard, on the driver's side near the steering column. To access it, simply open a plastic …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos