Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the Volkswagen Vento?

Model: Volkswagen Vento A5, MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Fuse box

See other generations:
Video tutorial

The fuses of the Volkswagen Vento are contained within the designated fuse boxes installed in the vehicle: this model has two. The first is located on the left side of the dashboard, accessible only by opening the driver's door: it contains the fuses for the ABS, electric windows, cabin fan, etc. The second box is found in the side of the engine compartment and contains the fuses for the dipped headlights, fuel pump, radiator fan, etc.


Updated on 3 September 2026 by ScegliAuto


Related tutorials

Where are the Fuses on the Volkswagen Vento?
Where are the Fuses on the Volkswagen Vento?
Volkswagen Vento (2018-2024 / MK 4, A7) Each fuse in the Volkswagen Vento is located inside one of the dedicated fuse boxes installed in the vehicle: in this type of car, there are two. The…
Where are the fuses located in the Volkswagen Vento?
Where are the fuses located in the Volkswagen Vento?
Volkswagen Vento (1991-1998 / A3, MK 1) Inside the Volkswagen Vento, all the fuses are contained within the single fuse box installed in the vehicle: in this type of car, the box is located…
Where are the cabin fuses located in the Volkswagen Vento?
Where are the cabin fuses located in the Volkswagen Vento?
Volkswagen Vento (2005-2011 / A5, MK 2) If you don't know where the cabin fuses of your Volkswagen Vento are located, all you need to do is read the following guide and follow the procedure…

Other guides you may be interested in

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos