Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radiator Fan on a Volkswagen Passat

Model: Volkswagen Passat B7 - Years 2010-2014
Part: Radiator

Today's main instructions will allow you to remove and replace the cooling radiator fan on a Volkswagen Passat. First, open the bonnet of the vehicle and start by disconnecting the electrical connector of the fan by unscrewing the upper screws; then lift the vehicle and disconnect the fan from the bottom by unscrewing all the securing screws, as shown in the video. At this point, remove the radiator fans, performing repairs or replacements as necessary; then reinstall the cooling fans, checking their operation!

Posted on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Radiator of the Volkswagen Passat TSI
Replacing the Radiator of the Volkswagen Passat TSI
Volkswagen Passat (2010-2014 / B7) The following steps will guide you on how to dismantle and replace the engine cooling radiator of the Volkswagen Passat with a TSI engine. First, ope…
Removing the Internal Radiator of the Volkswagen Passat
Removing the Internal Radiator of the Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Let’s discover in this brief guide the steps that will allow you to remove and replace the heating radiator of the Volkswagen Passat. First, open the…
How to Replace the Heating Radiator in a Volkswagen Passat?
How to Replace the Heating Radiator in a Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) To replace the heating radiator in a Volkswagen Passat, loosen the screws securing the side protection panel in the driver's footwell. Once the panel…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos