Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radiator of the Volkswagen Passat TSI

Model: Volkswagen Passat B7 - Years: 2010, 2011, 2012, 2013, 2014
Part: Radiator

See other generations:
Video tutorial

The following steps will guide you on how to dismantle and replace the engine cooling radiator of the Volkswagen Passat with a TSI engine. First, open the bonnet of the vehicle and start by removing the plastic intake hose; then unscrew the bolts of the radiator fan and disconnect its electrical connector, as shown in the video.

At this point, raise the vehicle and disconnect the radiator pipe, draining the fluid into a container; then unscrew the bolts of the radiator to remove it, replacing it with the new one and reassembling everything!


Updated on 19 September 2026 by ScegliAuto


Related tutorials

Replacement of the water pump of the Volkswagen Passat 2.0 TSI
Replacement of the water pump of the Volkswagen Passat 2.0 TSI
Volkswagen Passat (2005-2010 / B6, 3C) Today we will see the instructions that will show us how to disassemble and replace the water pump of the Volkswagen Passat 2.0 TSI. First, we open t…
How to replace the water pump of the Volkswagen Passat 1.4 TSI
How to replace the water pump of the Volkswagen Passat 1.4 TSI
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) Today we will see the main instructions that will allow us to disassemble and replace the water pump of the Volkswagen Passat 1.4 TSI. First, we open…
Replacing the Radiator Fan on a Volkswagen Passat
Replacing the Radiator Fan on a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Today's main instructions will allow you to remove and replace the cooling radiator fan on a Volkswagen Passat. First, open the bonnet of the vehicle…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos