Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the radiator of the Volkswagen Passat

Model: Volkswagen Passat B6, 3C - Years 2005-2010
Part: Radiator

Today we will explain how to replace the radiator of the Volkswagen Passat model B6 on your own. To perform the replacement of the radiator, we need to get into the car and remove the side torx screws found at the bottom on the driver's side and on the right side, in order to remove the lower parts of the dashboard. After removing the first part of the dashboard, we remove the fuse related to the radiator to avoid short circuits during the replacement of the part. We remove the central lower lance, removing the gear shift and base. We remove the heating pipes and remove the radiator. After removing the radiator, we can proceed with the steps in reverse for the installation of the part.

Posted on 2 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the heating radiator in the Volkswagen Passat?
How to replace the heating radiator in the Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) The procedure for replacing the cabin heating radiator in the Volkswagen Passat involves loosening the screws that secure the panel located in the da…
How to Replace the Heater Radiator on a Volkswagen Passat?
Volkswagen Passat (2005-2010 / B6, 3C) To replace the heater radiator on a Volkswagen Passat, loosen the screws securing the side panel of the passenger footwell. Once this panel is remove…
How to Remove the Radiator from a Volkswagen Passat
How to Remove the Radiator from a Volkswagen Passat
Volkswagen Passat (1996-2005 / 3BG, B5) How to remove the radiator from a Volkswagen Passat? Open the bonnet, remove the front bumper, then use a suitable socket wrench to detach the plates…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos