Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Passat
  6. : How do you replace the Volkswagen Passat heater radiator?

Volkswagen Passat - Video tutorial

Model: Volkswagen Passat 3C, B6 - Years 2005-2010
Part: Passenger compartment heating radiator
Operation: How do you replace the Volkswagen Passat heater radiator?

In order to replace the Volkswagen Passat heating radiator, you need to loosen the screws that secure the side panel of the footrest compartment on the passenger side. Once this panel has been removed, it will be possible to access the underlying components: in particular, it will be necessary to loosen the bolts that secure the pipes to the radiator. Subsequently, by accessing from the rear of the engine compartment, it will be possible to disconnect the additional pipes connected to the radiator. The latter can then be removed from its housing and replaced with a new spare part.


Posted on 26 September 2022 by ScegliAuto

This video is currently unavailable


Replacement of the cabin heating radiator of the Volkswagen Passat
Volkswagen Passat (2005-2010 / 3C, B6) Following these short and simple instructions, we will see how to disassemble and replace the heater radiator of the Volkswagen Passat. First of all,
Replacement of the heating radiator of the Volkswagen Passat B5
Volkswagen Passat (1996-2005 / 3BG, B5) In today's video, we will see how to disassemble and replace the heater radiator of the Volkswagen Passat B5. First, we open the hood of our car and
Remove the radiator heater radiator on a Vw Passat
Volkswagen Passat (2010-2014 / B7) Let's see how to remove the heating radiator on a Volkswagen Passat. We remove the plastic covering under the steering wheel and go up the side of th

    Frequently Asked Questions

    • Passat 2005-2010 - Where is the Volkswagen Passat heating radiator located? Read Answer
    • Passat 2005-2010 - Where is the interior heating radiator of the VW Passat b6? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos