Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Transporter
    4. : How to reset the service light on the Volkswagen Transporter T6

Volkswagen Transporter - Video tutorial

Model: Volkswagen Transporter T6, MK 6 - Years 2014-2024
Part: Instrument cluster
Operation: How to reset the service light on the Volkswagen Transporter T6

If you have a Volkswagen Transporter T6 (year 2014-2022) and you want to manually reset the service warning light that comes on on the instrument panel, just put the following guide into practice. First make sure you start the procedure with the vehicle completely off and the doors closed. Then press the button with the red triangle. Once this is done, locate the "0.0 / Set" button located below the speedometer and start the dashboard. As soon as you are asked if you want to reset the warning light, release the button and press the button under the rev counter once.


Posted on 10 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Transporter 1990-2003 - Why does the engine oil warning light come on in the Volkswagen Transporter TRA instrument cluster? Read Answer
    • Transporter 2003-2014 - What does it mean if the tire pressure warning light on the Volkswagen T5 stays on? Read Answer
    • Transporter 2003-2014 - What does the Volkswagen Transporter T5 engine light indicate? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos