Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Volkswagen Voyage?

Model: Volkswagen Voyage G5, NF - Years 2008-2023
Part: Service warning light

As we can see in this tutorial, resetting the service light on the Volkswagen Voyage is an extremely simple and quick operation. Before proceeding, make sure you have completed all required maintenance tasks. Start by inserting the key but leave it in the initial position, then press and hold the button indicating "0.0/SET", located just below the speedometer, while simultaneously turning on the ignition. At this point, hold the button for about 10 seconds, or until the "Insp" message disappears from the display. Finally, restart the ignition.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Manufacturer Emblems on the Volkswagen Voyage
How to Replace the Manufacturer Emblems on the Volkswagen Voyage
Volkswagen Voyage (2008-2023 / G5, NF) Here are the main steps to remove and replace the manufacturer emblems on the Volkswagen Voyage. First, remove the manufacturer emblem located on the…
How to Replace the Radiator on a Volkswagen Voyage?
How to Replace the Radiator on a Volkswagen Voyage?
Volkswagen Voyage (2008-2023 / G5, NF) To replace the radiator on a Volkswagen Voyage, open the hood to access the screws that secure the front bumper from the top. Once these are removed,…
Where are the fuses located in the Volkswagen Voyage?
Where are the fuses located in the Volkswagen Voyage?
Volkswagen Voyage (2008-2023 / G5, NF) The fuses in the Volkswagen Voyage are divided into specific fuse boxes installed in the vehicle: in this car model, you can find two boxes for holdi…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos