Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to disassemble the driver's door panel in Volkswagen Polo?

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Door panel
Operation: How to disassemble the driver's door panel in Volkswagen Polo?

In this tutorial we can see how to remove the driver's door panel in the Volkswagen Polo, a very simple and fast operation. First of all we open the door in question, then we unscrew the three screws located on the lower edge using a Torx screwdriver and, leveraging along the joint, we separate the window regulator control console. We then disconnect the various connectors, unscrew the two screws just released and separate the panel from the door by pulling it outwards. Once this is done, we can disconnect the lock cord and assemble the spare by following the reverse procedure.


Posted on 18 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Polo 1994-2003 - How do you remove the Volkswagen Polo door panel? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos