Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to reset TPMS on Volkswagen Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo V, MK V, 6R, Polo 5, MK 5 - Years 2009-2017
Part: -board computer
Operation: How to reset TPMS on Volkswagen Polo

When the low tire pressure warning light comes on on the control panel, we must first check the actual inflation pressures of the latter and, if necessary, restore the pressure envisaged by the manufacturer. After having done this we must cancel the signal present on the instrument panel and to do this we must press the Car command on the side of the touch display, then press on selection and then on vehicle status, scroll through the various pages up to low tire pressure indicator and press "set" to confirm the new pressure values.


Posted on 20 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - What does the engine malfunction warning light on the Volkswagen Polo mean? Read Answer
    • Polo 2017-2025 - What to do if voice control on the Volkswagen Polo is not available? Read Answer
    • Polo 2017-2025 - Why does the center display of the Volkswagen Polo 6 not work? Read Answer
    • Polo 2009-2017 - How to reset the tire warning light in a Wolksvagen Polo? Read Answer
    • Polo 2009-2017 - What does the Volkswagen Polo "Insp" light mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos