Do it yourself
| ||||
|
How to replace the front grille on a Volkswagen Jetta
Model: Volkswagen Jetta
A6, MK 6
- Years 2010-2018 Let's see how to replace the front grille of a Volkswagen Jetta: first we need to unscrew the four screws that hold the grille in place. Then we have to remove the grill gently, because in the lower part this is hooked with plastic clips, and pulling too firmly could break them. Now we have to remove the coat of arms; we turn the grill upside down and in the upper part, with the help of a small screwdriver, we lever in order to remove the coat of arms from its housing; then it will be sufficient to turn it clockwise to remove it. We can find the grid on all e-commerce platforms at prices ranging from 25.00 euros upwards for the simplest, and upwards from here. Now let's place the emblem on the new grid, putting the three clips in their place; of course now we will have to turn it counter-clockwise. We insert the clips into their housings and put the front grille back in place. Now we just have to screw back the four screws and the job is finished.
Posted on 17 September 2024 by ScegliAuto
How to remove the grille and front bumper of the Volkswagen Jetta MK4
Volkswagen Jetta (1998-2005 / A4, MK 4) In this video, we can see how to remove the front bumper and grille of the Volkswagen Jetta MK4. You just need to have a set of basic tools to do thi
How to replace the wiper motor on the Volkswagen Jetta?
Volkswagen Jetta (1998-2005 / A4, MK 4) In order to replace the Volkswagen Jetta wiper motor you have to loosen the bolts that secure the blades and remove the latter. Subsequently, it will
How to replace the front headlight of the Volkswagen Jetta
Volkswagen Jetta (1998-2005 / A4, MK 4) The steps outlined in this guide will show us how to disassemble and replace the front headlight of the Volkswagen Jetta, as well as the Bora and the Other guides that may interest you
|
How to deactivate the safe lock on a Volkswagen Golf.The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.087
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |