Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Grille of a Volkswagen Golf

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Grille

Before you start, open the front bonnet of your Volkswagen Golf. Begin by unscrewing and removing the four upper screws revealed when you opened the bonnet. Once all screws are removed, you will have freed the grille. Proceed to unclip it from its housing. After completing this step, you can fully remove the grille, finishing the disassembly. At this point, you are free to fit the new grille or repaint and refit the one you just removed.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Grille from a Volkswagen Golf VII
How to Remove the Grille from a Volkswagen Golf VII
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this video, you will see how to remove the front grille from a Volkswagen Golf VII: first, open the bonnet and locate the two screws that need to …
How to replace the front grille of the Volkswagen Golf 7
How to replace the front grille of the Volkswagen Golf 7
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In the following guide, we will describe all the steps you need to take if you intend to replace the front grille of your Volkswagen Golf Mk7 on your…
Dismantling the Front Grille of a Volkswagen Golf 7
Dismantling the Front Grille of a Volkswagen Golf 7
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In today's video, learn the entire operation necessary to dismantle the front grille of the radiator on a Volkswagen Golf, GTI model of the seventh g…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos