Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Front Grille of a Volkswagen Golf 7

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Grille

In today's video, learn the entire operation necessary to dismantle the front grille of the radiator on a Volkswagen Golf, GTI model of the seventh generation. Start the operation by opening the front bonnet and securing it with the support rod. Then, using a Torx 25 spanner, remove the two securing screws on either side of the grille. After that, grasp the grille and pull it towards you, disengaging it from the bumper as shown in the video to remove it completely. Now you can fit a new front grille following the reverse procedure.

Posted on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Air Vents from the Dashboard of a Volkswagen Golf
How to Remove the Air Vents from the Dashboard of a Volkswagen Golf
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Before you begin, sit in the driver's seat of your Volkswagen Golf. Start by prising off and removing the radio trim, then unscrew and remove the scr…
How to Remove the Air Vents from a Volkswagen Golf Mk4
How to Remove the Air Vents from a Volkswagen Golf Mk4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Remove the air vents along with the associated pieces (centre console) from a Volkswagen Golf Mk4. Use multiple levers to remove the vents: lever at …
How to Remove the Air Vents and Instrument Cluster of the Volkswagen Golf
How to Remove the Air Vents and Instrument Cluster of the Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) This tutorial video shows you how to remove and replace the front air vents of the dashboard, as well as the main parts and components of the instrum…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos