Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Bumper on a Volkswagen Jetta

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Front bumper

See other generations:
Video tutorial

In this brief guide, you will see the steps to remove and replace the front bumper on a Volkswagen Jetta. First, lift the vehicle and start by removing the plastic cover under the engine, unscrewing the fastening screws with a Torx screwdriver; then unscrew the additional screws located on both sides of the wheel arches, beginning to unclip the bumper from the sides, as illustrated in the video.

At this point, unscrew the screws located above the front bumper, removing the grille; then remove the bumper, applying the reverse procedure for reassembly!


Updated on 16 June 2026 by ScegliAuto


Related tutorials

Removing the Front Bumper of a Jetta
Removing the Front Bumper of a Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) Is the bumper of your Volkswagen Jetta damaged? Do you want to replace it? Here’s how. Lift the front bonnet and secure it. Use a socket to unscrew t…
How to Remove the Front Bumper of the Volkswagen Jetta
How to Remove the Front Bumper of the Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Briefly follow the steps to remove and replace the front bumper of the Volkswagen Jetta. First, open the bonnet of the vehicle and start unscrewing t…
How to Remove the Front Bumper on the Volkswagen Jetta
How to Remove the Front Bumper on the Volkswagen Jetta
Volkswagen Jetta (2018-2025 / A7, MK 7) To remove the front bumper on the Volkswagen Jetta, open the bonnet to loosen the fastening screws at the top of the bumper. Once these are unscrewed…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos