Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper of a Jetta

Model: Volkswagen Jetta MK 5, A5 - Years 2005-2010
Part: Front bumper

Is the bumper of your Volkswagen Jetta damaged? Do you want to replace it? Here’s how. Lift the front bonnet and secure it. Use a socket to unscrew the retaining screws located at the top of the grille. Remove the splash guards (take out the pins located at the bottom of the bumper). Unscrew the side screws between the bumper and the wing. Remove the retaining screws of the under-engine protection. Pull the bumper off the bodywork with your hands; disconnect the power connectors. Fit the new front bumper with all the screws and parts.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper on the Volkswagen Jetta
How to Remove the Front Bumper on the Volkswagen Jetta
Volkswagen Jetta (2018-2025 / A7, MK 7) To remove the front bumper on the Volkswagen Jetta, open the bonnet to loosen the fastening screws at the top of the bumper. Once these are unscrewed…
Replacing the Front Bumper on a Volkswagen Jetta
Replacing the Front Bumper on a Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) In this brief guide, you will see the steps to remove and replace the front bumper on a Volkswagen Jetta. First, lift the vehicle and start by removi…
How to Remove the Front Bumper from a Jetta
How to Remove the Front Bumper from a Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) Does removing the bumper from your car seem like a daunting task? Watch this video to see how to do it properly. First, unscrew the screws of the cen…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos