Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on a Volkswagen Jetta?

Model: Volkswagen Jetta MK 5, A5 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Front bumper

See other generations:
Video tutorial

Replacing the front bumper on a Volkswagen Jetta MK5, as shown in this tutorial, is an extremely simple and quick operation. First, open the bonnet, then unscrew the two screws located on the top side of the grille and detach it. Continue by unscrewing both the screws accessible from inside the wheel arch and those located underneath the vehicle, disconnect the fog light connectors, grasp the bumper from one of the two ends, and separate it from the frame.

To fit the replacement, simply follow the reverse procedure.


Updated on 9 October 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper on the Volkswagen Jetta
How to Remove the Front Bumper on the Volkswagen Jetta
Volkswagen Jetta (2018-2025 / A7, MK 7) To remove the front bumper on the Volkswagen Jetta, open the bonnet to loosen the fastening screws at the top of the bumper. Once these are unscrewed…
How to replace the front fender of the Volkswagen Jetta
How to replace the front fender of the Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) The instructions in this guide will show us how to disassemble and replace the front fender of the Volkswagen Jetta. First, we open the car's hood an…
How to Remove the Front Bumper on a Volkswagen Jetta?
How to Remove the Front Bumper on a Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) .. In this tutorial, see how to remove the front bumper on a Volkswagen Jetta, a very simple and quick operation. First, open.. …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos