Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on a Volkswagen Jetta?

Model: Volkswagen Jetta MK 6, A6 - Years 2010-2018
Part: Front bumper

In this tutorial, see how to remove the front bumper on a Volkswagen Jetta, a very simple and quick operation. First, open the bonnet, then locate the screws on the upper side of the grille and unscrew them with a Torx T25 spanner. Next, unscrew the additional screws accessible from inside the wheel arch, continue with those on the lower edge, and, holding it from one end, separate the bumper from the frame. At this point, simply position the replacement if needed and fit it by following the reverse procedure.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper on the Volkswagen Jetta
How to Remove the Front Bumper on the Volkswagen Jetta
Volkswagen Jetta (2018-2025 / A7, MK 7) To remove the front bumper on the Volkswagen Jetta, open the bonnet to loosen the fastening screws at the top of the bumper. Once these are unscrewed…
How to Remove the Front Headlight on a Volkswagen Jetta
How to Remove the Front Headlight on a Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) To remove the front headlight on a Volkswagen Jetta, open the bonnet to access the screws that secure the headlight at the top and the screws that se…
How to Remove the Rear Bumper of a Volkswagen Jetta
How to Remove the Rear Bumper of a Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) To remove the rear bumper of a Volkswagen Jetta, open the flap inside the boot to loosen the bolts and remove the rear light bulbs. This operation mu…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos