Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Jetta
    4. : How to remove the front bumper of the Volkswagen Jetta.

Volkswagen Jetta - Video tutorial

Model: Volkswagen Jetta A6, MK 6 - Years 2010-2018
Part: Front bumper
Operation: How to remove the front bumper of the Volkswagen Jetta.

Let's briefly go through the steps that will allow us to disassemble and replace the front bumper of the Volkswagen Jetta. First, we open the car's engine hood and start unscrewing the fastening screws that we find on the top using a T25 Torx screwdriver. Then, we unscrew the additional screws located under the front bumper and on both sides of the wheel arches, as shown in the video. At this point, we gently detach the bumper on the sides until we remove it completely. Finally, we disconnect the electrical connectors of the front fog light bulbs.


Posted on 11 April 2023 by ScegliAuto



How do you remove the front bumper of the Volkswagen Jetta?
Volkswagen Jetta (2018-2024 / A7, MK 7) In order to remove the front bumper of the Volkswagen Jetta you have to open the hood, so that you can loosen the fixing screws of the upper part of
Remove the front bumper of a Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) Is the bumper of our Volkswagen Jetta damaged? Do we want to replace it? Let's see how. We lift the front hood and put it in safety. With a socket wr
Volkswagen Jetta front bumper replacement
Volkswagen Jetta (2010-2018 / A6, MK 6) In this short guide we will see the steps on how to disassemble and replace the front bumper of the Volkswagen Jetta. First we raise the car and star

Other guides that may interest you

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos