Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fog light on the Volkswagen Caddy?

Model: Volkswagen Caddy MK 3, 2K - Years 2003-2020
Part: Fog lights

To replace the fog light on the Volkswagen Caddy, use a tool to pry off the cover that surrounds the corresponding fog light: once this plastic cover has been removed, you can loosen the screws underneath that secure the light to its housing. After these screws have been loosened, you can extract the light from its position and disconnect its connector at the back. After removal, insert the new light, connecting it and securing it properly in its place.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Volkswagen Caddy located?
Where is the fuse box of the Volkswagen Caddy located?
Volkswagen Caddy (1996-2008 / 9K, 9U, MK 2) If you want to quickly and safely locate the fuse box inside your Volkswagen Caddy, just follow the following procedure and carry out the described s…
Where is the OBD2 port located in the Volkswagen Caddy?
Where is the OBD2 port located in the Volkswagen Caddy?
Volkswagen Caddy (2003-2020 / MK 3, 2K) If you need to locate the OBD2 port inside your Volkswagen Caddy by yourself, just follow the simple procedure described below. First, enter the vehi…
Where is and how to reach the fuse box of a Volkswagen Caddy?
Where is and how to reach the fuse box of a Volkswagen Caddy?
Volkswagen Caddy (2020-2026 / SB) The fuse box of a Volkswagen Caddy is located in the engine compartment, near the right side. To access it, open the front hood of your Volkswagen Ca…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos